All Issue

2021 Vol.12, Issue 2 Preview Page

General Article

30 June 2021. pp. 110-125
H. Feng, D.R. Liyanage, H. Karunathilake, and R. Sadiq, BIM-based life cycle environmental performance assessment of single-family houses: Renovation and reconstruction strategies for aging building stock in British Columbia. 250(119543) (2020). 10.1016/j.jclepro.2019.119543
Z. Ma, P. Cooper, D. Daly, and L. Ledo, Existing building retrofits: Methodology and state-of-the-art. Energy and Buildings, 55 (2012), pp. 889-902. 10.1016/j.enbuild.2012.08.018
R. Volk, J. Stengel, and F. Schultmann, Building Information Modeling (BIM) for existing buildings - Literature review and future needs. Automation in Construction, 38 (2014), pp. 109-127. 10.1016/j.autcon.2013.10.023
E. Asadi, M.G. da Silva, C.H. Antunes, and L. Dias, A multi-objective optimization model for building retrofit strategies using TRNSYS simulations, GenOpt and MATLAB. Building and Environment, 56 (2012a), pp. 370-378. 10.1016/j.buildenv.2012.04.005
E. Asadi, M.G. da Silva, C.H. Antunes, and L. Dias, Multi-objective optimization for building retrofit strategies: A model and an application. Energy and Buildings, 44 (2012b), pp. 81-87. 10.1016/j.enbuild.2011.10.016
A.N. Nielsen, R.L. Jensen, T.S. Larsen, and S.B. Nissen, Early stage decision support for sustainable building renovation - A review. Building and Environment, 103 (2016), pp. 165-181. 10.1016/j.buildenv.2016.04.009
Y.-W. Lim, Indoor Environmental Comfort in Malaysian Urban Housing. American Journal of Environmental Science, 9(5) (2013), pp. 431-438. 10.3844/ajessp.2013.431.438
W. Yu, B. Li, H. Jia, M. Zhang, and D. Wang, Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design. Energy and Buildings, 88 (2015), pp. 135-143. 10.1016/j.enbuild.2014.11.063
Y.-W. Lim, BIM-based sustainable building design process and decision-making. in International Conference on Research and Innovation in Information Systems, ICRIIS, Langkawi, Malaysia, 2017. 10.1109/ICRIIS.2017.8002488
A.M. Lewis, R. Valdes-Vasquez, and C. Clevenger, Understanding the preceived value of using BIM for energy simulation. Journal of Green Building, 14(1) (2019), pp. 79-92. 10.3992/1943-4618.14.1.79
S. Song, J. Yang, and N. Kim, Development of a BIM-based structural framework optimization and simulation system for building construction. Computers in Industry, 63(9) (2012), pp. 895-912. 10.1016/j.compind.2012.08.013
Y.-W. Lim, Building Information Modeling for Indoor Environmental Performance Analysis. American Journal of Environmental Sciences, 11(2) (2015), pp. 55-61. 10.3844/ajessp.2015.55.61
R.J. Scherer and P. Katranuschkov, BIMification: How to create and use BIM for retrofitting. Advanced Engineering Informatics, 38 (2018), pp. 54-66. 10.1016/j.aei.2018.05.007
L. Sanhudo, N.M. Ramos, J.P. Martins, R.M. Almeida, E. Barreira, M.L. Simões, and V. Cardoso, Building information modeling for energy retrofitting - A review. Renewable and Sustainable Energy Reviews, 89 (2018), pp. 249-260. 10.1016/j.rser.2018.03.064
Y.-W. Lim, H. Majid, A. Samah, M. Ahmad, D. Ossen, M. Harun, and F. Shahsavari, BIM and Genetic Algorithm optimisation for sustainable building envelope design. International Journal of Sustainable Development and Planning, 13(1) (2018), pp. 151-159. 10.2495/SDP-V13-N1-151-159
Y.-W. Lim, T.E. Seghier, M.F. Harun, M.H. Ahmad, A.A. Samah, and H.A. Majid, Computational BIM for Building Envelope Sustainability Optimization. MATEC Web of Conferences, 278(04001) (2019). 10.1051/matecconf/201927804001
K.M. Kensek, Teaching visual scripting in BIM: a case study using a panel controlled by solar angles. Journal of Green Building, 13(1) (2018), pp. 113-138. 10.3992/1943-4618.13.1.113
M.F. Harun, A.A. Samah, H.A. Majid, Y. Yusoff, and Y.-W. Lim, Optimization of Green Building Design to Achieve Green Building Index (GBI) Using Genetic Algorithm (GA). in 6th ICT International Student Project Conference: Elevating Community Through ICT, ICT-ISPC, Skudai, Malaysia, 2017. 10.1109/ICT-ISPC.2017.8075310
D.B. Dalumo, Y.W. Lim, and F.b.A. Taufik, Computational BIM for green building design. in International Graduate Conference of Built Environment and Surveying, Johor Bahru, 2019.
K. Kensek, Visual programming for building information modelling: energy and shading analysis case study. Journal of Green Building, 10(4) (2015), pp. 28-43. 10.3992/jgb.10.4.28
T.E. Seghier, M.H. Ahmad, and Y.-W. Lim, Automation of Concrete Usage Index (CUI) assessment using computational BIM. International Journal of Built Environment and Sustainability, 6(1) (2019), pp. 23-30. 10.11113/ijbes.v6.n1.319
H.-Y. Chong, C.-Y. Lee, and X. Wang, A mixed review of the adoption of Building Information Modelling (BIM) for sustainability. Journal of Cleaner Production, 142 (2017), pp. 4114-4126. 10.1016/j.jclepro.2016.09.222
W.-T. Hong, K. Ibrahim, and S.-C. Loo, Urging Green Retrofits of Building Façades in The Tropics-A Review and Research Agenda. International Journal of Technology, 10(6) (2019), pp. 1140-1149. 10.14716/ijtech.v10i6.3627
NBS Enterprises Ltd, National BIM Report 2019- The definitive industry update. Newcastle upon Tyne, 2019.
Autodesk, About Energy Analysis for Autodesk® Revit®, Autodesk Inc., 8 February 2017a. [Online], Available at: [Accessed 30/4/2020].
J.P. Carvalho, L. Bragança, and R. Mateus, Optimising building sustainability assessment using BIM. Automation in Construction, 102 (2019), pp. 170-182. 10.1016/j.autcon.2019.02.021
Autodesk, Ecotect Analysis Discontinuation FAQ, Autodesk Inc., 20 April 2016. [Online], Available at: [Accessed 30/4/2020].
Autodesk, About Green Building Studio and Energy Analysis, Autodesk Inc., 8 Feb 2017b. [Online], Available at: [Accessed 30/4/2020].
A.N. Sadeghifam, M.M. Meynagh, S. Tabatabaee, A. Mahdiyar, A. Memari, and S. Ismail, Assessment of the building components in the energy efficient design of tropical residential buildings: An application of BIM and statistical Taguchi method. Energy, 188(116080) (2019). 10.1016/
A. Rocha, D. Pinto, N.M. Ramos, R.M. Almeida, E. Barreira, M.L. Simoes, J.P. Martins, P.F. Pereira, and L. Sanhudo, A case study to improve the winter thermal comfort of an existing bus station. Journal of Building Engineering, 29(101123) (2020). 10.1016/j.jobe.2019.101123
P.-H. Lin, C.-C. Chang, Y.-H. Lin, and W.-L. Lin, Green BIM Assessment Applying for Energy Consumption and Comfort in the Traditional Public Market: A Case Study. Sustainability, 11(4636) (2019). 10.3390/su11174636
R.E. Edwards, E. Lou, A. Bataw, S.N. Kamaruzzaman, and C. Johnson, Sustainability-led design: Feasibility of incorporating whole-life cycle energy assessment into BIM for refurbishment projects. Journal of Building Engineering, 24(100697) (2019). 10.1016/j.jobe.2019.01.027
S.H. Kim, Assessing the Needs and Gaps of Building Information Technologies for Energy Retrofit of Historic Buildings in the Korean Context. Sustainability, 10(1319) (2018). 10.3390/su10051319
G. Gourlis and I. Kovacic, Building Information Modelling for analysis of energy efficient industrial buildings - A case study. Renewable and Sustainable Energy Reviews, 68 (2017), pp. 953-963. 10.1016/j.rser.2016.02.009
A. Chong, W. Xu, S. Chao, and N.-T. Ngo, Continuous-time Bayesian calibration of energy models using BIM and energy data. Energy & Buildings, 194 (2019), pp. 177-190. 10.1016/j.enbuild.2019.04.017
F. Shadram and J. Mukkavaara, An integrated BIM-based framework for the optimization of thetrade-off between embodied and operational energy. Energy and Buildings, 158 (2018), pp. 1189-1205. 10.1016/j.enbuild.2017.11.017
A. Farzaneh, D. Monfet, and D. Forgues, Review of using Building Information Modeling for building energy modeling during the design process. Journal of Building Engineering, 23 (2019), pp. 127-135. 10.1016/j.jobe.2019.01.029
S. Habibi, The promise of BIM for improving building performance. Energy and Buildings, 153 (2017), pp. 525-548. 10.1016/j.enbuild.2017.08.009
E. Kamel and A.M. Memari, Automated Building Energy Modeling and Assessment Tool (ABEMAT). Energy, 147 (2018), pp. 15-24. 10.1016/
S. Maltese, L.C. Tagliabue, F.R. Cecconi, D. Pasini, M. Manfren, and A.L. Ciribini, Sustainability assessment through green BIM for environmental, social and economic efficiency. Procedia Engineering, 180 (2017), pp. 520-530. 10.1016/j.proeng.2017.04.211
G. Li, Y. Xu and Y. Fan, The Design of Sustainable Retrofitting Strategies and Energy-efficiency Optimization for Residential Buildings. IOP Conf. Series: Materials Science and Engineering, 556(012054) (2019). 10.1088/1757-899X/556/1/012054
S. Pinheiro, R. Wimmer, J. O'Donnell, S. Muhic, V. Bazjanac, T. Maile, J. Frisch, and C. v. Treeck, MVD based information exchange between BIM and building energy performance simulation. Automation in Construction, 90 (2018), pp. 91-103. 10.1016/j.autcon.2018.02.009
L. Wei, S. Liu, Q. Wei, and Y. Wang, Concept, Method and Application of Computational BIM. 1084, F. Xhafa, S. Patnaik and M. Tavana, Eds., Springer International Publishing, 2019, pp. 392-398. 10.1007/978-3-030-34387-3_48
G. Branca, I. Curto, D. Tamborini, S. Maltese, P. Corti and C.P. Soares, Portfolio energy analysis and condition assessment: case study of public schools of the Lugano municipality. Journal of Physics: Conference Series, 1343(012131) (2019). 10.1088/1742-6596/1343/1/012131
Y.-W. Lim, T.E. Seghier, M.F. Harun, M.H. Ahmad, A.A. Samah and H.A. Majid, Computational BIM for green retrofitting of existing building envelope. in WIT Transactions on The Built Environment, (2019). 10.2495/BIM190041
B. Ozarisoy and H. Altan, Low-energy design strategies for retrofitting existing residential buildings in Cyprus. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 172(5) (2019), pp. 241-255. 10.1680/jensu.17.00061
S. Habibi, E.A. Obonyo, and A.M. Memari, Design and development of energy efficient re-roofing solutions. Renewable Energy, 151 (2020), pp. 1209-1219. 10.1016/j.renene.2019.11.128
Q. He, S.T. Ng, M.U. Hossain, and M. Skitmore, Energy-Efficient Window Retrofit for High-Rise Residential Buildings in Different Climatic Zones of China. Sustainability, 11(6473) (2019). 10.3390/su11226473
M. Hu, Optimal Renovation Strategies for Education Buildings-A Novel BIM-BPM-BEM Framework. Sustainability, 10(3287) (2018). 10.3390/su10093287
S. Eleftheriadis, D. Mumovic, and P. Greening, Life cycle energy efficiency in building structures: A review of current developments and future outlooks based on BIM capabilities. Renewable and Sustainable Energy Reviews, 67 (2017), pp. 811-825. 10.1016/j.rser.2016.09.028
M. Cellura, F. Guarino, S. Longo, and M. Mistretta, Modeling the energy and environmental life cycle of buildings: A co-simulation approach. Renewable and Sustainable Energy Reviews, 80 (2017), pp. 733-742. 10.1016/j.rser.2017.05.273
M.Á. García-Fuentes, S. Álvarez, V. Serna, M. Pousse, and A. Meiss, Integration of Prioritisation Criteria in the Design of Energy Efficient Retrofitting Projects at District Scale: A Case Study. Sustainability, 11(3861) (2019). 10.3390/su11143861
F.R. Cecconi, L.C. Tagliabue, N. Moretti, E.D. Angelis, A.G. Mainini, and S. Maltese, Energy Retrofit Potential Evaluation: The Regione Lombardia School Building Asset. in Buildings for Education , D. T. S., B. M., D. L. and N. R., Eds., Springer, Cham, 2019, pp. 305-315. 10.1007/978-3-030-33687-5_27
M.M. Ahsan, M. Zulqernain, H. Ahmad, B.A. Wajid, S. Shahzad, and M. Hussain, Reducing the Operational Energy Consumption in Buildings by Passive Cooling Techniques Using Building Information Modelling Tools. International Journal of Renewable Energy Research, 9(1) (2019).
S. Eleftheriadis, P. Duffour, and D. Mumovic, BIM-embedded life cycle carbon assessment of RC buildings using optimised structural design alternatives. Energy & Buildings, 173 (2018), pp. 587-600. 10.1016/j.enbuild.2018.05.042
M. Dupuis, A. April, P. Lesage, and D. Forgues, Method to enable LCA analysis through each level of development of a BIM model. in Creative Construction Conference (CCC) 2017, Primosten, Croatia, (2017). 10.1016/j.proeng.2017.08.017
E. Kamel and A.M. Memari, Review of BIM's application in energy simulation: Tools, issues, and solutions. Automation in Construction, 97 (2019), pp. 164-180. 10.1016/j.autcon.2018.11.008
J. Jeon, J. Lee, and Y. Ham, Quantifying the impact of building envelope condition on energy use. Building Research & Information, 47(4) (2018). 10.1080/09613218.2018.1448959
Y. Lu, Z. Wu, R. Chang, and Y. Li, Building Information Modeling (BIM) for green buildings: A critical review and future directions. Automation in Construction, 83 (2017), pp. 134-148. 10.1016/j.autcon.2017.08.024
H.H. Kwok, J.C. Cheng, A.T. Li, J.C. Tong, and A.K. Lau, Multi-zone indoor CFD under limited information: An approach coupling solar analysis and BIM for improved accuracy. Journal of Cleaner Production, 244(118912) (2020). 10.1016/j.jclepro.2019.118912
L. Sanhudo, N.M. Ramos, J.P. Martins, R.M. Almeida, E. Barreira, M.L. Simões, and V. Cardoso, Building information modeling for energy retrofitting - A review. Renewable and Sustainable Energy Reviews, 89 (2018), pp. 249-260. 10.1016/j.rser.2018.03.064
P. Tzortzopoulos, L. Ma, J.S. Junior, and L. Koskela, Evaluating Social Housing Retrofit Options to Support Clients' Decision Making-SIMPLER BIM Protocol. Sustainability, 11(2507) (2019). 10.3390/su11092507
  • Publisher :Sustainable Building Research Center (ERC) Innovative Durable Building and Infrastructure Research Center
  • Publisher(Ko) :건설구조물 내구성혁신 연구센터
  • Journal Title :International Journal of Sustainable Building Technology and Urban Development
  • Volume : 12
  • No :2
  • Pages :110-125
  • Received Date : 2020-12-10
  • Accepted Date : 2021-05-31
Journal Informaiton International Journal of Sustainable Building Technology and Urban Development International Journal of Sustainable Building Technology and Urban Development
  • scopus
  • NRF
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close