All Issue

2019 Vol.10, Issue 3 Preview Page

General Article

Greenhouse gas emission analysis for each material composition of a cement reactive siloxane polymer-based penetration resist agent
Rakhyun Kim1
,
Sungho Tae2*
,
Hyojin Lim3
1Post Doctor, Sustainable Building Research Center, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan, South Korea
2Professor, Department of Architecture & Architectural Engineering, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan, South Korea
3Researcher, Sustainable Building Research Center, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan, South Korea
* Corresponding Author
30 September 2019. pp. 167-175
PDF XML Citation
Abstract

According to maintenance technology, in order to calculate the increase in service life of structures and reduction in environmental load, a quantitative environmental impact assessment is necessary. There must be a basic unit quantifying environmental impact emission for building materials. This study aims to use polysiloxane and perform life cycle greenhouse gas emission evaluation based on an optimal composition ratio of a cement reactive siloxane polymer-based compound and penetration resist agent. Accordingly, the greenhouse gas emission of this agent was evaluated by securing basic data and life cycle inventory database for raw materials such as isophorone diisocyanate, ethylene glycol, and polydimethylsiloxane. An evaluation of greenhouse gas emission of the penetration resist agent was performed, and the greenhouse gas emissions of the agent at different composition ratios were comparatively analyzed. According to the evaluation, the carbon dioxide emission 1.68 kg-CO2eq/m2 showed the highest contribution 93.51% in the overall emission of 1.94 kg-CO2eq/m2

Keywords
cement reactive
siloxane polymer
greenhouse gases
penetration resist agent
References
1
J.D. Silvestre, J. de Brito, and M.D. Pinheiro, Environmental impacts and benefits of the end-of-life of build-ing materials-calculation rules, results and contribution to a "cradle to cradle" life cycle, J. Clean. Prod. 66 (2014) pp. 37-45.
10.1016/j.jclepro.2013.10.028
2
C.F. Huang and J.L. Chen, The promotion strategy of green construction materials: A path analysis approach, Materials (Basel). 8 (2015) pp. 6999-7005.
10.3390/ma810535428793613PMC5455398
3
R. Kim, S. Tae, and S. Roh, Development of low carbon durability design for green apartment buildings in South Korea, Renew Sustain Energy Rev. 77 (2017), pp. 263-272.
10.1016/j.rser.2017.03.120
4
R. Kim, S. Tae, K. Yang, T. Kim, and S. Roh, Analysis of Lifecycle CO2 Reduction Performance for Long-Life Apartment House, Environmental Progress & Sustainable Energy. 34(2) (2015), pp. 555-566.
10.1002/ep.12032
5
KEITI, Environmental Product Declaration. Available online: http://www.epd.or.kr/ (accessed on 30 June 2019).
6
M. Park, S. Roh, D. Kim, K. Jeon, and J. Noh, Evaluation of basic performance of concrete using a penetrating water repellency based on cement reactive siloxane polymer, International Journal of Sustainable Building Technology and Urban Development. 9(4) (2018), pp. 279-288.
7
J.G. Dai, Y. Akira, F.H. Wittmann, H. Yokota, and P. Zhang, Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments, The role of cracks, Cement and Concrete Composites. 32(2) (2010), pp. 101-109.
10.1016/j.cemconcomp.2009.11.001
8
J. Lee and Y. Kim, Evaluation of the Physical and Durable Properties of Polymer-modified Cement Mortars as a Repair Material, Architectural Institute of Korea. 21(4) (2005), pp. 157-164.
9
S. Roh, S. Tae, and R. Kim, Analysis of Embodied Environmental Impacts of Korean Apartment Build-ings Considering Major Building Materials, Sustainability. 10(6) (2018), p. 1693.
10.3390/su10061693
10
S. Roh, S. Tae, S.J. Suk, and G. Ford, Evaluating the embodied environmental impacts of major building tasks and materials of apartment buildings in Korea, Renew Sustain Energy Rev. 73(2017), pp. 135-144.
10.1016/j.rser.2017.01.081
11
S. Roh, S. Tae, R. Kim, and D. Kim, Environmental impact assessment of polymer cement mortar filling method for structure maintenance, International Journal of Sustainable Building Technology and Urban Development 9(4) (2018), pp. 186-196.
12
IES, Institute for Environment and Sustainability, ILCD Handbook : Recommendations for Life Cycle Impact Assessment in the European context, 2011.
Information
  • Publisher :Sustainable Building Research Center (ERC) Innovative Durable Building and Infrastructure Research Center
  • Publisher(Ko) :건설구조물 내구성혁신 연구센터
  • Journal Title :International Journal of Sustainable Building Technology and Urban Development
  • Volume : 10
  • No :3
  • Pages :167-175
  • Received Date : 2019-09-11
  • Accepted Date : 2019-09-27
  • DOI :https://doi.org/10.22712/susb.20190017
Journal Informaiton International Journal of Sustainable Building Technology and Urban Development International Journal of Sustainable Building Technology and Urban Development
Online Submission
  • scopus
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close